This Type Of Melt Flow Indexer Is A New & Affordable Tabletop Instrument That Tests The Melt Mass-flow Rate (MFR) & Melt Volume-flow Rate (MVR) Of A Wide Range Of Thermoplastic Raw Materials, In The Form Of Granules, Strips Of Film Etc. This Test Method Is Particularly Useful For Quality Control Tests On Thermoplastics. MVR Will Be Found Particularly Useful When Comparing Materials Of Different Filler Content & When Comparing Filled With Unfilled Thermoplastics. The MFR Can Be Determined From MVR Measurements Provided The Melt Density At The Test Temperature & Pressure Is Known. The Tester Is Far Superior To All National And International Standard Of Melt Flow Rates Requirements, Including IS01133, ASTM D1238 & GBIT 3682 Method A & B. High Accuracy The Built-in Microprocessor Maintains Temperature Control To Within ± 0.5°C, With Rapid Ram-up To The Set Point. Extruded Material Is Automatically Cut Off By The Built-in Scraper Mechanism At Preset Intervals, Controllable To ± 0.1 Second. Ease To Operate! Testing Melt Flow Rate Has Never Been So Economical Or Easy To Do! The Tester Is Supplied Completely With The Accessories & Weights Necessary For Maintenance & Operation. Nothing Else To Buy-just Plug It In & Start A Test